CryptX v0.085 Perl 5 v5.41.11 x86_64-linux-thread-multi
- Status
- Fail
- From
- Carlos Guevara
- Dist
-
CryptX v0.085
- Platform
- Perl 5 v5.41.11 x86_64-linux-thread-multi
- Date
- 2025-04-16 14:45:18
- ID
- 6aa66f24-1ad1-11f0-8326-e7c0c8646a93
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Karel Miko,
This is a computer-generated report for CryptX-0.085
on perl 5.41.11, created by CPAN-Reporter-1.2020.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
"/home/cpan/bin/perl/bin/perl5.41.11" -MExtUtils::Command::MM -e 'cp_nonempty' -- CryptX.bs blib/arch/auto/CryptX/CryptX.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/bin/perl/bin/perl5.41.11" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing CryptX 0.085, Perl 5.041011 linux /home/cpan/bin/perl/bin/perl5.41.11
# osname = linux
# osvers = 6.12.23_1
# archname = x86_64-linux-thread-multi
# uname = uname
# myarchname = x86_64-linux
# myuname = linux cjg-void 6.12.23_1 #1 smp preempt_dynamic sun apr 13 02:32:13 utc 2025 x86_64 gnulinux
# gccversion = 14.2.1 20250405
# ccversion =
# cc = cc
# intsize = 4
# longsize = 8
# longlongsize = 8
# ptrsize = 8
# byteorder = 12345678
#
# LibTomCrypt 1.18.2-develop (www.libtom.net)
# LibTomCrypt is public domain software.
#
#
# Endianness: little (64-bit words)
# Clean stack: disabled
#
# Ciphers built-in:
# Blowfish
# RC2
# RC5
# RC6
# Safer+
# Safer
# Rijndael
# XTEA
# Twofish (tables)
# DES
# DES-X
# 3DES
# SM4
# CAST5
# Noekeon
# Skipjack
# Khazad
# Anubis (tweaked)
# KSEED
# KASUMI
# MULTI2
# Camellia
# IDEA
# Serpent
# TEA
# Stream ciphers built-in:
# ChaCha
# Salsa20
# XSalsa20
# Sosemanuk
# Rabbit
# RC4
# SOBER128
#
# Hashes built-in:
# SHA3
# KECCAK
# SHA-512
# SHA-384
# SHA-512/256
# SHA-256
# SHA-512/224
# SHA-224
# TIGER
# SHA1
# MD5
# MD4
# MD2
# RIPEMD128
# RIPEMD160
# RIPEMD256
# RIPEMD320
# WHIRLPOOL
# BLAKE2S
# BLAKE2B
# CHC_HASH
#
# Block Chaining Modes:
# CFB
# OFB
# ECB
# CBC
# CTR
# LRW (tables)
# F8
# XTS
#
# MACs:
# HMAC
# OMAC
# PMAC
# PELICAN
# XCBC
# F9
# POLY1305
# BLAKE2S MAC
# BLAKE2B MAC
#
# ENC + AUTH modes:
# EAX
# OCB
# OCB3
# CCM
# GCM (tables)
# CHACHA20POLY1305
#
# PRNG:
# Yarrow (LTC_YARROW_AES=2)
# SPRNG
# RC4
# ChaCha20
# Fortuna (LTC_FORTUNA_POOLS=32, LTC_FORTUNA_RESEED_RATELIMIT_STATIC, LTC_FORTUNA_WD=10)
# SOBER128
#
# PK Crypto:
# RSA (with blinding and CRT hardening)
# DH
# ECC (with blinding)
# DSA
# Ed25519
# X25519
# LTC_PK_MAX_RETRIES=20
#
# MPI (Math):
# LTC_MPI
# LTM_DESC
# LTC_MILLER_RABIN_REPS=40
#
# Compiler:
# GCC compiler 14.2.1 20250405.
# x86-64 detected.
#
# Various others: ARGTYPE=4 ADLER32 AES-NI BASE64 BASE64-URL-SAFE BASE32 BASE16 BCRYPT LTC_BCRYPT_DEFAULT_ROUNDS=10 CRC32 DER LTC_DER_MAX_RECURSION=30 PKCS#1 PKCS#5 PKCS#8 PKCS#12 PADDING HKDF PBES1 PBES2 PEM LTC_PEM_DECODE_BUFSZ=80 LTC_PEM_READ_BUFSIZE=8192 SSH OpenSSH-PEM LTC_DEVRANDOM LTC_TRY_URANDOM_FIRST LTC_RNG_GET_BYTES LTC_RNG_MAKE_PRNG LTC_HASH_HELPERS LTC_FILE_READ_BUFSIZE=8192 LTC_FAST LTC_ROx_ASM LTC_NO_TEST LTC_ECC_SHAMIR
#
# MP_PROVIDER = LibTomMath
# MP_DIGIT_BIT = 60
#
t/001_compile.t ..................... ok
t/002_all_pm.t ...................... skipped: set AUTHOR_MODE to enable this test (developer only!)
t/003_all_pm_pod.t .................. skipped: set AUTHOR_MODE to enable this test (developer only!)
t/004_all_pm_pod_spelling.t ......... skipped: set AUTHOR_MODE to enable this test (developer only!)
t/005_all_pm_pod_coverage.t ......... skipped: set AUTHOR_MODE to enable this test (developer only!)
t/auth_enc_ccm.t .................... ok
t/auth_enc_ccm_test_vector_ltc.t .... ok
t/auth_enc_chacha20poly1305.t ....... ok
t/auth_enc_eax.t .................... ok
t/auth_enc_eax_test_vector_ltc.t .... ok
t/auth_enc_gcm.t .................... ok
t/auth_enc_gcm_test_vector_ltc.t .... ok
t/auth_enc_ocb.t .................... ok
t/auth_enc_ocb_test_vectors_ietf.t .. ok
t/checksum.t ........................ ok
t/cipher_aes.t ...................... ok
t/cipher_aes_test_vectors_bc.t ...... ok
t/cipher_anubis.t ................... ok
t/cipher_blowfish.t ................. ok
t/cipher_camellia.t ................. ok
t/cipher_cast5.t .................... ok
t/cipher_des.t ...................... ok
t/cipher_des_ede.t .................. ok
t/cipher_idea.t ..................... ok
t/cipher_idea_compat.t .............. ok
t/cipher_kasumi.t ................... ok
t/cipher_khazad.t ................... ok
t/cipher_multi2.t ................... ok
t/cipher_multi2_rounds.t ............ ok
t/cipher_noekeon.t .................. ok
t/cipher_rc2.t ...................... ok
t/cipher_rc5.t ...................... ok
t/cipher_rc6.t ...................... ok
t/cipher_safer_k128.t ............... ok
t/cipher_safer_k64.t ................ ok
t/cipher_safer_sk128.t .............. ok
t/cipher_safer_sk64.t ............... ok
t/cipher_saferp.t ................... ok
t/cipher_seed.t ..................... ok
t/cipher_seed_test_vectors_bc.t ..... ok
t/cipher_serpent.t .................. ok
t/cipher_serpent_compat.t ........... ok
t/cipher_skipjack.t ................. ok
t/cipher_stream.t ................... ok
t/cipher_stream_rabbit.t ............ ok
t/cipher_stream_salsa20.t ........... ok
t/cipher_test_vectors_ltc.t ......... ok
t/cipher_test_vectors_openssl.t ..... ok
t/cipher_twofish.t .................. ok
t/cipher_twofish_test_vectors_bc.t .. ok
t/cipher_xtea.t ..................... ok
t/cipher_xtea_test_vectors_bc.t ..... ok
t/crypt-misc.t ...................... ok
t/digest_blake2b_160.t .............. ok
t/digest_blake2b_256.t .............. ok
t/digest_blake2b_384.t .............. ok
t/digest_blake2b_512.t .............. ok
t/digest_blake2s_128.t .............. ok
t/digest_blake2s_160.t .............. ok
t/digest_blake2s_224.t .............. ok
t/digest_blake2s_256.t .............. ok
t/digest_chaes.t .................... ok
t/digest_keccak224.t ................ ok
t/digest_keccak256.t ................ ok
t/digest_keccak384.t ................ ok
t/digest_keccak512.t ................ ok
t/digest_md2.t ...................... ok
t/digest_md4.t ...................... ok
t/digest_md5.t ...................... ok
t/digest_ripemd128.t ................ ok
t/digest_ripemd160.t ................ ok
t/digest_ripemd256.t ................ ok
t/digest_ripemd320.t ................ ok
t/digest_sha1.t ..................... ok
t/digest_sha224.t ................... ok
t/digest_sha256.t ................... ok
t/digest_sha384.t ................... ok
t/digest_sha3_224.t ................. ok
t/digest_sha3_256.t ................. ok
t/digest_sha3_384.t ................. ok
t/digest_sha3_512.t ................. ok
t/digest_sha512.t ................... ok
t/digest_sha512_224.t ............... ok
t/digest_sha512_256.t ............... ok
t/digest_shake.t .................... ok
t/digest_test_vectors_ltc.t ......... ok
t/digest_tiger192.t ................. ok
t/digest_whirlpool.t ................ ok
t/jwk.t ............................. ok
t/key_derivation.t .................. ok
t/mac_blake2b.t ..................... ok
t/mac_blake2s.t ..................... ok
t/mac_f9.t .......................... ok
t/mac_hmac.t ........................ ok
t/mac_hmac_nist.t ................... ok
t/mac_hmac_test_vectors_ltc.t ....... ok
t/mac_omac.t ........................ ok
t/mac_omac_test_vectors_ltc.t ....... ok
t/mac_pelican.t ..................... ok
t/mac_pmac.t ........................ ok
t/mac_pmac_test_vectors_ltc.t ....... ok
t/mac_poly1305.t .................... ok
t/mac_xcbc.t ........................ ok
# Math::BigInt VERSION=2.005002
t/mbi_ltm_01load.t .................. ok
# Failed test '$x = Math::BigFloat->new("+2"); $y = Math::BigFloat->new("+3"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("+3"); $y = Math::BigFloat->new("+2"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("-3"); $y = Math::BigFloat->new("+2"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("-3"); $y = Math::BigFloat->new("-2"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("-144"); $y = Math::BigFloat->new("-60"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '12'
# Failed test '$x = Math::BigFloat->new("144"); $y = Math::BigFloat->new("-60"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '12'
# Failed test '$x = Math::BigFloat->new("144"); $y = Math::BigFloat->new("60"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '12'
# Failed test '$x = Math::BigFloat->new("100"); $y = Math::BigFloat->new("625"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '25'
# Failed test '$x = Math::BigFloat->new("4096"); $y = Math::BigFloat->new("81"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("1034"); $y = Math::BigFloat->new("804"); Math::BigFloat::bgcd($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '2'
# Failed test '$x = Math::BigFloat->new("27"); $y = Math::BigFloat->new("90"); $z = Math::BigFloat->new("56"); Math::BigFloat::bgcd($x, $y, $z);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("27"); $y = Math::BigFloat->new("90"); $z = Math::BigFloat->new("54"); Math::BigFloat::bgcd($x, $y, $z);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '9'
# Failed test '$x = Math::BigFloat->new("+0"); $y = Math::BigFloat->new("+0"); Math::BigFloat::blcm($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: '0'
# expected: 'NaN'
# Failed test '$x = Math::BigFloat->new("+27"); $y = Math::BigFloat->new("+90"); Math::BigFloat::blcm($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '270'
# Failed test '$x = Math::BigFloat->new("+1034"); $y = Math::BigFloat->new("+804"); Math::BigFloat::blcm($x, $y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '415668'
# Failed test '$x = Math::BigFloat->new("1"); $y = Math::BigFloat->new("10"); $x->bsin($y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.8414709848'
# Failed test '$x = Math::BigFloat->new("2.1"); $y = Math::BigFloat->new("12"); $x->bsin($y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.863209366649'
# Failed test '$x = Math::BigFloat->new("1.2"); $y = Math::BigFloat->new("13"); $x->bsin($y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.9320390859672'
# Failed test '$x = Math::BigFloat->new("0.2"); $y = Math::BigFloat->new("13"); $x->bsin($y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.1986693307951'
# Failed test '$x = Math::BigFloat->new("3.2"); $y = Math::BigFloat->new("12"); $x->bsin($y);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-0.0583741434276'
# Failed test '$x = Math::BigFloat->new("3"); $y = Math::BigFloat->new("4"); $z = Math::BigFloat->new("8"); $x->bmodpow($y, $z);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("3"); $y = Math::BigFloat->new("4"); $z = Math::BigFloat->new("7"); $x->bmodpow($y, $z);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '4'
# Failed test '$x = Math::BigFloat->new("3"); $y = Math::BigFloat->new("4"); $z = Math::BigFloat->new("7"); $x->bmodpow($y, $z);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '4'
# Failed test '$x = Math::BigFloat->new("77777"); $y = Math::BigFloat->new("777"); $z = Math::BigFloat->new("123456789"); $x->bmodpow($y, $z);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '99995084'
# Failed test '$x = Math::BigFloat->new("3.2"); $y = Math::BigFloat->new("6.2"); $z = Math::BigFloat->new("5.2"); $x->bmodpow($y, $z);'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '2.970579856718063040273642739529400818'
# Failed test '$x = Math::BigFloat->new("9"); $y = Math::BigFloat->new("4"); $Math::BigFloat::round_mode = "even"; join(",", $x->bdiv($y));'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '2,1'
# Failed test '$x = Math::BigFloat->new("9"); $y = Math::BigFloat->new("5"); $Math::BigFloat::round_mode = "even"; join(",", $x->bdiv($y));'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1,4'
# Failed test '$x = Math::BigFloat->new("2.1"); $y = Math::BigFloat->new("-1"); $Math::BigFloat::round_mode = "even"; join(",", $x->bdiv($y));'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-2.1,0'
# Failed test '$x = Math::BigFloat->new("2.1"); $y = Math::BigFloat->new("1"); $Math::BigFloat::round_mode = "even"; join(",", $x->bdiv($y));'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '2.1,0'
# Failed test '$x = Math::BigFloat->new("-2.1"); $y = Math::BigFloat->new("-1"); $Math::BigFloat::round_mode = "even"; join(",", $x->bdiv($y));'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '2.1,0'
# Failed test '$x = Math::BigFloat->new("-2.1"); $y = Math::BigFloat->new("1"); $Math::BigFloat::round_mode = "even"; join(",", $x->bdiv($y));'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-2.1,0'
# Failed test '$x = Math::BigFloat->new("+9"); $y = Math::BigFloat->new("4"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("+9"); $y = Math::BigFloat->new("5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '4'
# Failed test '$x = Math::BigFloat->new("+9000"); $y = Math::BigFloat->new("56"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '40'
# Failed test '$x = Math::BigFloat->new("+56"); $y = Math::BigFloat->new("9000"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '56'
# Failed test '$x = Math::BigFloat->new("1"); $y = Math::BigFloat->new("2"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("1000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("2000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '2'
# Failed test '$x = Math::BigFloat->new("3000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '3'
# Failed test '$x = Math::BigFloat->new("4000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '4'
# Failed test '$x = Math::BigFloat->new("5000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '5'
# Failed test '$x = Math::BigFloat->new("6000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '6'
# Failed test '$x = Math::BigFloat->new("7000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '7'
# Failed test '$x = Math::BigFloat->new("8000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '8'
# Failed test '$x = Math::BigFloat->new("9000000000"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("35500000"); $y = Math::BigFloat->new("113"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '33'
# Failed test '$x = Math::BigFloat->new("71000000"); $y = Math::BigFloat->new("226"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '66'
# Failed test '$x = Math::BigFloat->new("106500000"); $y = Math::BigFloat->new("339"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '99'
# Failed test '$x = Math::BigFloat->new("1000000000"); $y = Math::BigFloat->new("3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("10"); $y = Math::BigFloat->new("5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("100"); $y = Math::BigFloat->new("4"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("1000"); $y = Math::BigFloat->new("8"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("10000"); $y = Math::BigFloat->new("16"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("999999999999"); $y = Math::BigFloat->new("9"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("999999999999"); $y = Math::BigFloat->new("99"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("999999999999"); $y = Math::BigFloat->new("999"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("999999999999"); $y = Math::BigFloat->new("9999"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("999999999999999"); $y = Math::BigFloat->new("99999"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("-9"); $y = Math::BigFloat->new("+5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("+9"); $y = Math::BigFloat->new("-5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-1'
# Failed test '$x = Math::BigFloat->new("-9"); $y = Math::BigFloat->new("-5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-4'
# Failed test '$x = Math::BigFloat->new("-5"); $y = Math::BigFloat->new("3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("-2"); $y = Math::BigFloat->new("3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("4"); $y = Math::BigFloat->new("3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("1"); $y = Math::BigFloat->new("3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '1'
# Failed test '$x = Math::BigFloat->new("-5"); $y = Math::BigFloat->new("-3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-2'
# Failed test '$x = Math::BigFloat->new("-2"); $y = Math::BigFloat->new("-3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-2'
# Failed test '$x = Math::BigFloat->new("4"); $y = Math::BigFloat->new("-3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-2'
# Failed test '$x = Math::BigFloat->new("1"); $y = Math::BigFloat->new("-3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-2'
# Failed test '$x = Math::BigFloat->new("100041000510123"); $y = Math::BigFloat->new("3"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("152403346"); $y = Math::BigFloat->new("12345"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '4321'
# Failed test '$x = Math::BigFloat->new("123"); $y = Math::BigFloat->new("2.5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.5'
# Failed test '$x = Math::BigFloat->new("1230"); $y = Math::BigFloat->new("2.5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0'
# Failed test '$x = Math::BigFloat->new("123.4"); $y = Math::BigFloat->new("2.5"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.9'
# Failed test '$x = Math::BigFloat->new("123e1"); $y = Math::BigFloat->new("25"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '5'
# Failed test '$x = Math::BigFloat->new("-2.1"); $y = Math::BigFloat->new("1"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.9'
# Failed test '$x = Math::BigFloat->new("2.1"); $y = Math::BigFloat->new("1"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '0.1'
# Failed test '$x = Math::BigFloat->new("-2.1"); $y = Math::BigFloat->new("-1"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-0.1'
# Failed test '$x = Math::BigFloat->new("2.1"); $y = Math::BigFloat->new("-1"); $x % $y;'
# at ./t/mbi_ltm/bigfltpm.inc line 168.
# got: undef
# expected: '-0.9'
# Looks like you planned 2391 tests but ran 2319.
# Looks like you failed 79 tests of 2319 run.
t/mbi_ltm_bigfltpm.t ................
Dubious, test returned 79 (wstat 20224, 0x4f00)
Failed 151/2391 subtests
(less 1 skipped subtest: 2239 okay)
t/mbi_ltm_bigintg.t ................. ok
t/mbi_ltm_bigintpm.t ................ ok
t/mbi_ltm_biglog.t .................. ok
t/mbi_ltm_bigroot.t ................. ok
t/mbi_ltm_bugs.t .................... ok
# use64=1 ivsize=8 ivtype=long use64bitint=define
t/mbi_ltm_mbi-from-big-scalar.t ..... ok
t/mbi_ltm_since_1.999837.t .......... ok
t/mbi_ltm_since_1.999842.t .......... ok
t/mbi_ltm_storable.t ................ ok
t/mode_cbc.t ........................ ok
t/mode_cfb.t ........................ ok
t/mode_ctr.t ........................ ok
t/mode_ecb.t ........................ ok
t/mode_ofb.t ........................ ok
t/pk_dh.t ........................... ok
t/pk_dsa.t .......................... ok
t/pk_dsa_test_vectors_openssl.t ..... ok
t/pk_ecc.t .......................... ok
t/pk_ecc_test_vectors_openssl.t ..... ok
t/pk_ed25519.t ...................... ok
t/pk_enc_pem.t ...................... ok
t/pk_rsa.t .......................... ok
t/pk_rsa_test_vectors_openssl.t ..... ok
t/pk_x25519.t ....................... ok
t/pkcs8.t ........................... ok
t/prng.t ............................ ok
t/prng_chacha20.t ................... ok
t/prng_fortuna.t .................... ok
t/prng_rc4.t ........................ ok
t/prng_sober128.t ................... ok
t/prng_yarrow.t ..................... ok
t/sshkey.t .......................... ok
Test Summary Report
-------------------
t/mbi_ltm_bigfltpm.t (Wstat: 20224 (exited 79) Tests: 2319 Failed: 79)
Failed tests: 35-46, 53, 59-60, 69, 74-77, 1515-1519
1622-1627, 1762-1765, 1830, 1833-1865, 1868-1869
1872-1879
Non-zero exit status: 79
Parse errors: Bad plan. You planned 2391 tests but ran 2319.
Files=137, Tests=25181, 17 wallclock secs ( 1.61 usr 0.22 sys + 13.06 cusr 1.54 csys = 16.43 CPU)
Result: FAIL
Failed 1/137 test programs. 79/25181 subtests failed.
make: *** [Makefile:1457: test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ----- --------
Math::BigInt 0 2.005002
perl 5.006 5.041011
build_requires:
Module Need Have
------------------- ----- --------
ExtUtils::MakeMaker 0 7.74
Test::More 0 1.302210
configure_requires:
Module Need Have
------------------- ----- --------
ExtUtils::MakeMaker 0 7.74
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
DATE_MANIP_TEST_DM5 = 1
LANG = en_US.UTF-8
LC_ALL = C
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
NO_NETWORK_TESTING = 1
PATH = /home/cpan/bin/perl/bin:/home/cpan/bin:/home/cpan/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 25217
PERL5_CPAN_IS_RUNNING = 25217
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen
TMPDIR = /home/cpan/tmp
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/cpan/bin/perl/bin/perl5.41.11
$UID/$EUID = 1001 / 1001
$GID = 1001 1001
$EGID = 1001 1001
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.38
CPAN::Meta 2.150010
Cwd 3.94
ExtUtils::CBuilder 0.280240
ExtUtils::Command 7.74
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.74
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.57
File::Spec 3.94
JSON 4.10
JSON::PP 4.16
Module::Build 0.4234
Module::Signature 0.89
Parse::CPAN::Meta 2.150010
Test2 1.302210
Test::Harness 3.50
Test::More 1.302210
YAML 1.31
YAML::Syck n/a
version 0.9933
--
Summary of my perl5 (revision 5 version 41 subversion 11) configuration:
Commit id: 7946d6a39ecd42bbb39400c0df1c3bf3a7edfa71
Platform:
osname=linux
osvers=6.12.23_1
archname=x86_64-linux-thread-multi
uname='linux cjg-void 6.12.23_1 #1 smp preempt_dynamic sun apr 13 02:32:13 utc 2025 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/bin/perl -Dscriptdir=/home/cpan/bin/perl/bin -Dusedevel -Duse64bitall -Duseithreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2'
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='14.2.1 20250405'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lpthread -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=/lib/../lib64/libc.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_LONG_DOUBLE
HAS_STRTOLD
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_SIPHASH13
PERL_HASH_USE_SBOX32
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
PERL_USE_SAFE_PUTENV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under linux
Compiled at Apr 16 2025 09:39:13
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="25217"
PERL5_CPAN_IS_RUNNING="25217"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/bin/perl/lib/site_perl/5.41.11/x86_64-linux-thread-multi
/home/cpan/bin/perl/lib/site_perl/5.41.11
/home/cpan/bin/perl/lib/5.41.11/x86_64-linux-thread-multi
/home/cpan/bin/perl/lib/5.41.11
.