Net-STOMP-Client v2.4 Perl 5 v5.10.1 x86_64-linux
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Net-STOMP-Client v2.4
- Platform
- Perl 5 v5.10.1 x86_64-linux
- Date
- 2021-10-16 11:13:25
- ID
- 14ee2d00-2e72-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear LCONS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9912. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.10.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1decode.t ... ok
t/1frame.t .... ok
t/1parse.t .... ok
Can't locate IO/Socket/IP.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/arch /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5 /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/arch /home/cpan/pit/bare/perl-5.10.1/lib/5.10.1/x86_64-linux /home/cpan/pit/bare/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux /home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib/Net/STOMP/Client/Connection.pm line 23.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib/Net/STOMP/Client/Connection.pm line 23.
Compilation failed in require at t/1uri.t line 5.
BEGIN failed--compilation aborted at t/1uri.t line 5.
t/1uri.t ......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate IO/Socket/IP.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/arch /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1 /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/x86_64-linux /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5 /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/arch /home/cpan/pit/bare/perl-5.10.1/lib/5.10.1/x86_64-linux /home/cpan/pit/bare/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux /home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib/Net/STOMP/Client/Connection.pm line 23.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib/Net/STOMP/Client/Connection.pm line 23.
Compilation failed in require at /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib/Net/STOMP/Client.pm line 24.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib/Net/STOMP/Client.pm line 24.
Compilation failed in require at t/2broker.t line 7.
BEGIN failed--compilation aborted at t/2broker.t line 7.
t/2broker.t ...
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/2message.t .. skipped: Messaging::Message required for this test
t/3pod.t ...... skipped: Test::Pod 1.22 required for testing POD
t/4podcov.t ... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
Test Summary Report
-------------------
t/1uri.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/2broker.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=8, Tests=291, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.32 cusr 0.05 csys = 0.43 CPU)
Result: FAIL
Failed 2/8 test programs. 0/291 subtests failed.
make: *** [Makefile:891: test_dynamic] Error 255
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
IO::Socket::IP
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'LCONS (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'IO::Socket::IP' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Encode 2.35 0
IO::Socket::INET 1.31 0
List::Util 1.21 0
No::Worries 1.7 1.2
POSIX 1.17 0
Params::Validate 1.30 0
Test::More 1.302186 0
Time::HiRes 1.9719 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9912
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.37
Pod::Simple 3.07
Test2 1.302186
Test::Harness 3.42
Test::More 1.302186
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5:/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 114494
PERL5_CPANPLUS_IS_VERSION = 0.9912
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.10.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/JYbiFiN1Ur
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/JYbiFiN1Ur"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/JYbiFiN1Ur
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.10.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=linux, osvers=5.4.0-26-generic, archname=x86_64-linux
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.10.1'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
Locally applied patches:
Devel::PatchPerl 1.90
Built under linux
Compiled at Apr 26 2020 12:58:00
%ENV:
PERL5LIB="/home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5:/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="114494"
PERL5_CPANPLUS_IS_VERSION="0.9912"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.10.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/JYbiFiN1Ur"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/JYbiFiN1Ur""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/JYbiFiN1Ur"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1/x86_64-linux
/home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/5.10.1
/home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5/x86_64-linux
/home/cpan/pit/jail/JYbiFiN1Ur/lib/perl5
/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/lib
/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/pjX3TIH3ZF/Net-STOMP-Client-2.4/blib/arch
/home/cpan/pit/bare/perl-5.10.1/lib/5.10.1/x86_64-linux
/home/cpan/pit/bare/perl-5.10.1/lib/5.10.1
/home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux
/home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1
.