HTML-ExtractMeta v0.10 Perl 5 v5.12.4 i386-gnukfreebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
HTML-ExtractMeta v0.10
- Platform
- Perl 5 v5.12.4 i386-gnukfreebsd
- Date
- 2013-10-28 02:52:41
- ID
- 0333ba96-3f7c-11e3-b8b2-96b61dda783b
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TOREAU,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9142. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.12.4/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00.load.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
# Failed test 'use HTML::ExtractMeta;'
# at t/00.load.t line 10.
# Tried to use 'HTML::ExtractMeta'.
# Error: Can't locate namespace/autoclean.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/arch /home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4/i386-gnukfreebsd /home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4 /home/cpan/pit/bare/perl-5.12.4/lib/5.12.4/i386-gnukfreebsd /home/cpan/pit/bare/perl-5.12.4/lib/5.12.4 .) at /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib/HTML/ExtractMeta.pm line 3.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib/HTML/ExtractMeta.pm line 3.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Use of uninitialized value $HTML::ExtractMeta::VERSION in concatenation (.) or string at t/00.load.t line 13.
# Tests were run but no plan was declared and done_testing() was not seen.
# Failed test 'use HTML::ExtractMeta;'
# at t/10.extract.t line 12.
# Tried to use 'HTML::ExtractMeta'.
# Error: Can't locate namespace/autoclean.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/arch /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/arch /home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4/i386-gnukfreebsd /home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4 /home/cpan/pit/bare/perl-5.12.4/lib/5.12.4/i386-gnukfreebsd /home/cpan/pit/bare/perl-5.12.4/lib/5.12.4 .) at /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib/HTML/ExtractMeta.pm line 3.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib/HTML/ExtractMeta.pm line 3.
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.
Can't locate object method "get_title" via package "HTML::ExtractMeta" at t/10.extract.t line 20.
# Tests were run but no plan was declared and done_testing() was not seen.
t/10.extract.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/00.load.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/10.extract.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=2, Tests=2, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.13 cusr 0.07 csys = 0.25 CPU)
Result: FAIL
Failed 2/2 test programs. 2/2 subtests failed.
make: *** [test_dynamic] Error 255
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
namespace::autoclean
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'TOREAU (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'namespace::autoclean' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.78 6.64
File::Slurp 9999.19 9999.19
FindBin 1.50 1.42
Mojolicious 4.50 4.50
Mouse 1.13 1.13
Test::More 0.98 0.98
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9142
CPANPLUS::Dist::Build 0.70
Cwd 3.40
ExtUtils::CBuilder 0.280212
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.78
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.22
File::Spec 3.40
Module::Build 0.4007
Pod::Parser 1.37
Pod::Simple 3.14
Test::Harness 3.28
Test::More 0.98
version 0.9904
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/script:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/arch:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/arch:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/arch:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 77124
PERL5_CPANPLUS_IS_VERSION = 0.9142
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.12.4
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.12.4/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 4) configuration:
Platform:
osname=gnukfreebsd, osvers=9.0-2-686, archname=i386-gnukfreebsd
uname='gnukfreebsd knurl 9.0-2-686 #0 sat nov 24 07:40:35 utc 2012 i386 i386 amd a6-3670 apu with radeon(tm) hd graphics gnukfreebsd '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.12.4'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.7.2', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/i386-kfreebsd-gnu /lib /usr/lib/i386-kfreebsd-gnu /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.13'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Built under gnukfreebsd
Compiled at Feb 24 2013 20:15:57
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/arch:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/arch:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/arch:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="77124"
PERL5_CPANPLUS_IS_VERSION="0.9142"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.12.4"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/lib
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/File-Slurp-9999.19/blib/arch
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/lib
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-4.50/blib/arch
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/lib
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mouse-1.13/blib/arch
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/lib
/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/HTML-ExtractMeta-0.10/blib/arch
/home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4/i386-gnukfreebsd
/home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4
/home/cpan/pit/bare/perl-5.12.4/lib/5.12.4/i386-gnukfreebsd
/home/cpan/pit/bare/perl-5.12.4/lib/5.12.4
.